Cooling factory is the cooling system

Cooling factory is the cooling system operating under two principles: the cooling system and positive pressure cooling system, negative pressureThe cooling system is a positive pressure system blowing cold air into the factory, being built from a combination of the following devices:

A. System cooling plant capacity, heavy trafficTwo. Pipeline cold wind on buildings3. Down wind systems: delivering cool air into buildings4. Mount system, bed frameFive. Circulating water tank system6. Water pump system: Provide cooling water for machines7. Electric box: Controls the switching devices in the system8. Equipment, supplies electrical systemsCoolers factory installed spread evenly over the entire plant (all cooling) or only be installed at the focus position of employees (local cooling). So with this system saves investment costs as well as power consumption while creating a cool environment to work.When the active cooling system part of the water evaporates into the air to reduce the heat, the rest being returned to continue a new cycle, and always have a supply of water was added to compensate the water was lost due to evaporation. Also because of the circulatory system should be very economical and economically, the water always changes make the system work more efficiently, our air will blow on the premises clean and cool.Features of the factory cooling system positive pressure:

    Investment costs and operating low investment costs by 30%, power consumption by 10% compared with air-conditioning systems tradition.
High efficiency: when the machine is air purifiers, reduce heat, and oxygen content increase is compensated humidity, creating an ideal working environment that improves productivity and ensure the health of workers.The cooling system is negative pressure cooling system by: A gable fan installation factory inlet flow industry with high winds to suck all the hot air, dust pollution and industrial waste plant out.

At the first workshop in the face of industrial exhaust fans installed truss frame heat exchanger system (gantry frame heat exchanger is constituted by the cooling plate (plate heat exchanger), the plate is cooled pumps regular water supply for irrigation by both sides of the plate on top and then moisture distribution over the entire surface of the cooling plate. water after cooling the system through broken pipes and gutter pipes recovered back the tank to keep the new cycle. hot and dry air from outside through the cooling plate, the heat exchanger directly into air and water clean and cool, creating adequate moisture and reduced temperature air in the factory.Practice has proved factory cooling system much more efficient than conventional air conditioning system.- Installation of easy execution, does not affect plant operations- Do not damage the ozone layer, environmental protection- Saves power- Investment cost only 1/3 with air conditioning and operating costs only 1/10 the air- This system reduces the temperature from 5-100C, for example, the outdoor temperature is 350C, by using this cooling system in the factory temperature only from 25-280C.Scope of application:- Workshop for outsourcing: May, dyeing, shoes, plastics, electroplating, electronics, printing, food packaging ...- Workshop for manufacturing: textile, machinery, metallurgy, glass, industrial chemicals, leather, pottery ...- Place of Public hospitals, bus stations, stadiums, exhibition hall, kitchen, restaurant, entertainment center, underground supermarket, warehouse, laundry ...- Livestock farming industry: home grown flowers, plants, poultry, livestock, fisheries